Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on the Ford Transit Custom

Model: Ford Transit MK 8 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

See other generations:
Video tutorial

To manually remove the service and engine oil change light from the Ford Transit, follow a straightforward procedure that is well within everyone's reach. First, switch off the engine, then insert the key and turn on the ignition.

At the same time, press and hold the brake pedal and the accelerator pedal for about fifteen seconds. As soon as all the various confirmation messages related to the reset appear on the display, you can release both pedals and switch off the ignition.

The operation is complete, but if the light continues to illuminate, you can repeat the process without any issues.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Change Light on a Ford Custom
How to Reset the Oil Change Light on a Ford Custom
Ford Transit (2023-2026 / Custom2) There are two methods to reset the service light on a Ford Transit Custom: using the steering wheel controls on the right side, turn on the ignition …
How to Reset the Service Light on Ford Transit Custom
How to Reset the Service Light on Ford Transit Custom
Ford Transit (2012-2024 / Custom) To reset the service light on the Ford Transit Custom, get in the vehicle and turn on the ignition without starting the engine. Fully press the accel…
How to Reset the Service Light on the Ford Transit Custom
How to Reset the Service Light on the Ford Transit Custom
Ford Transit (2012-2024 / Custom) Below are the instructions on how to correctly reset the service light on your Ford Transit Custom. The steps are quite simple and quick as follows. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos