Do it yourself
Frequently asked questions about cars and motorcycles

What are the most common faults of the Ford Kuga?

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Checks and maintenance

We have compiled a list of the 10 most common problems concerning utility vehicles, specifically the Ford Kuga produced from 2013 to 2019. 1) Some models of the Ford Kuga released from 2013 to 2014 were recalled in the United States due to insufficient compression on the engine wiring junctions to the engine sensors, this problem can cause engine hesitation or stalling while driving. 2) Some automatic transmissions in earlier models of this generation tend to slip over time. 3) The infotainment and navigation system in some vehicles tends to not work properly, examples are maps not loading, dropped calls, and radio stopping working. 4) The water pump in 1.6 engines tends to become noisy and develop leaks over time, leading to its replacement before the expected 150,000 km. 5) Wheel bearings that prematurely wear out. 6) After two years, some models' battery loses the ability to hold a full charge. 7) Shock absorbers tend to develop fluid leaks over time. 8) The air conditioning compressor tends to experience premature failures. 9) The alternator in models with a 2-liter engine is prone to malfunctions before the expected 170,000 km. 10) The temperature sensor is subject to malfunctions that freeze the liquid, causing engine problems.

Posted on 6 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Ford Kuga (2008-2012 / C394, MK 1) In this video tutorial, you can see which bulbs are fitted in the Ford Kuga by following a few simple steps. The headlamp bulb kit used is model 78 0…
Ford Kuga (2020-2026 / MK 3) In this video we can see where the fuse boxes of the Ford Kuga are located and what are the corresponding schemes, to consult in case we need to chec…
Ford Kuga (2012-2019 / C520, MK 2) In this video, we can see where the fuse boxes of the Ford Kuga are located and what their respective diagrams are, useful in case we need to check t…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Hyundai Tucson

Today, we will discover the instructions that will allow you to reset the tyre pressure warning light (TPMS) on the Hyundai Tucson; before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get in the vehicle and start the ignition; next, navigate to the onboard computer settings using the controls on the steering wheel until you reach the tyre pressure monitoring section, as shown in the video. At this point, confirm and execute the reset of the TPMS warning light!

Watch the video!


by ScegliAuto

More videos