Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. Sonata
  6. : Driver airbag removal instructions

Hyundai Sonata - Video tutorial

Model: Hyundai Sonata - Years 2004-2014
Part: Airbags
Operation: Driver airbag removal instructions

The driver airbag is fixed to the steering wheel by means of two lateral pins: behind the steering wheel there are in fact two lateral holes through which it is possible to access the fixing pins; then insert the torx type key inside the hole and unscrew the fixing pin, first on one side and then on the other, remove the airbag from the steering wheel, release the detonator sockets by first extracting the relative safety tabs and the horn power supply. If you want to prevent the airbag failure warning light from coming on, it is advisable to disconnect the battery before disconnecting the sockets.


Posted on 12 August 2023 by ScegliAuto



Battery removal instructions
Hyundai Sonata (2004-2014 / ) Removing the battery is extremely simple and requires no special precautions other than to write down any activation codes such as the car radio and
Front bumper removal instructions
Hyundai Sonata (2004-2014 / ) To remove the front bumper, start by opening the front hood to remove the pressure clips along the closing edge and which secure the plastic grille t
Front bumper removal instructions
Hyundai Sonata (2004-2014 / ) The disassembly of the front bumper is very simple to perform and you do not have to disassemble any other element: it is in fact a cover, as if it w

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos