Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mazda
  4. :
  5. Mx 5
  6. : 1998-2005 (MK 2, NB)

Mazda Mx 5 Years 1998-2005 (MK 2, NB)

Mazda Mx 5 (1998-2005 / MK 2, NB)
What is the fuse layout of the Mazda MX-5?

In this video we can see where the fuse boxes of the Mazda MX-5 are located and what their respective diagrams are, useful in case we need to check the fuses …Read all…
Posted on 26 July 2025 by ScegliAuto
Mazda Mx 5 (1998-2005 / MK 2, NB)
How to open the fuel door on the Mazda MX-5?

In this tutorial we can see how to open the fuel door on the Mazda MX-5, a very simple operation that is not much different from the typical procedure of most …Read all…
Posted on 4 October 2024 by ScegliAuto
Mazda Mx 5 (1998-2005 / MK 2, NB)
How to set the time on the Mazda Miata

If you want to manually change the time displayed on your Mazda MX5 Miata, all you have to do is read the following guide and follow the steps described. First …Read all…
Posted on 7 July 2024 by ScegliAuto
Mazda Mx 5 (1998-2005 / MK 2, NB)
How to disassemble the front headlight of a Mazda MX-5?

To remove the front headlight of a Mazda MX-5, you will need to follow a procedure that involves removing the bumper before being able to access the headlight. …Read all…
Posted on 21 April 2024 by ScegliAuto
Mazda Mx 5 (1998-2005 / MK 2, NB)
Battery replacement for Mazda MX-5

Today we will see the step-by-step instructions that will allow us to disassemble and replace the battery of the Mazda MX-5, in simple and quick steps. First, …Read all…
Posted on 16 February 2024 by ScegliAuto
Mazda Mx 5 (1998-2005 / MK 2, NB)
How to Remove the Radio from the 2002 Mazda MX5 Miata

In this mini guide dedicated to your 2002 Mazda MX5 Miata, you will discover how to quickly and correctly remove the standard radio. First, obtain metal pins …Read all…
Posted on 24 July 2026 by ScegliAuto
Mazda Mx 5 (1998-2005 / MK 2, NB)
Replacing Window Regulator Motor on Mazda MX-5

As shown in the video, start by removing the door panel and then take out all the small screw covers and unscrew all the screws that secure it to the bodywork. …Read all…
Posted on 13 May 2026 by ScegliAuto
Mazda Mx 5 (1998-2005 / MK 2, NB)
How to Change the Wishbone on a Mazda MX-5

For this more complex job, you will need a ramp to work safely and comfortably. Once the car is raised, remove the wheel from the correct side to expose the …Read all…
Posted on 7 March 2026 by ScegliAuto
Mazda Mx 5 (1998-2005 / MK 2, NB)
How to Restart Your Car's Engine

Sometimes batteries run flat unexpectedly if headlights or lights are left on, making this issue more common than you might think. In such cases, do not panic; …Read all…
Posted on 5 March 2026 by ScegliAuto
Mazda Mx 5 (1998-2005 / MK 2, NB)
Fitting LED Lights to Your Car

The term LED stands for "Light Emitting Diode". Installing LEDs in vehicles requires minimal time and effort. This guide explains how to fit economical LEDs to …Read all…
Posted on 3 March 2026 by ScegliAuto
Mazda Mx 5 (1998-2005 / MK 2, NB)
How to Replace a Suspension Arm

The suspension arm of the car connects the chassis to the struts, but it can wear out or deform after an impact, leading to a dangerous loss of vehicle …Read all…
Posted on 2 March 2026 by ScegliAuto
Mazda Mx 5 (1998-2005 / MK 2, NB)
Removing the Starter Motor

Removing the starter motor on this car model is not exactly straightforward due to its position at the rear of the engine beneath the intake manifold; to …Read all…
Posted on 1 March 2026 by ScegliAuto
Mazda Mx 5 (1998-2005 / MK 2, NB)
Cleaning a Sports-Type Engine Air Filter

If the car is equipped with a sports-type engine air filter, it is made of cotton fibres wrapped in a special metal mesh; this type of filter allows for an …Read all…
Posted on 1 March 2026 by ScegliAuto
Mazda Mx 5 (1998-2005 / MK 2, NB)
Replacing the Intake Manifold Gasket

Replacing the intake manifold gasket is quite straightforward, especially since there is enough space in the engine compartment to comfortably disassemble and …Read all…
Posted on 26 February 2026 by ScegliAuto
Mazda Mx 5 (1998-2005 / MK 2, NB)
Cleaning Engine Intake Ducts

There are many products available for cleaning the engine intake ducts: start the engine and run it at a speed between 2,500 and 3,000 RPM while spraying the …Read all…
Posted on 26 February 2026 by ScegliAuto
Mazda Mx 5 (1998-2005 / MK 2, NB)
Instructions for Installing LED Headlight Bulbs

Replacing the original headlight bulbs with LED ones instead of xenon will give the vehicle a significantly more modern appearance and improve visibility. …Read all…
Posted on 25 February 2026 by ScegliAuto
Mazda Mx 5 (1998-2005 / MK 2, NB)
Timing Belt Replacement

It is recommended to perform this maintenance only if you have good general mechanical knowledge, as a simple error in positioning the belt could severely …Read all…
Posted on 16 February 2026 by ScegliAuto
Mazda Mx 5 (1998-2005 / MK 2, NB)
How to Convert Door Lock from Mechanical to Central Locking

Using a specific kit, you can convert your car's door locking system from mechanical to central locking. First, remove the door panel, starting with the clip …Read all…
Posted on 15 February 2026 by ScegliAuto
Mazda Mx 5 (1998-2005 / MK 2, NB)
Removing the Car Stereo

Removing the car stereo is not difficult; it just requires a bit of patience and a screwdriver, as shown in the following guide. The screwdriver can be …Read all…
Posted on 15 February 2026 by ScegliAuto
Mazda Mx 5 (1998-2005 / MK 2, NB)
Removal and Replacement of the Intake Manifold

This tutorial explains how to remove and replace the intake manifold on a Mazda MX-5. Open the bonnet and disconnect the negative terminal of the battery. …Read all…
Posted on 14 February 2026 by ScegliAuto
Speaker (2) Car stereo (8) Battery (1) Control arm (2) Spark plugs (1) Convertible top (1) Body (4) Key (7) Timing belt (2) V-belt (1) Checks and maintenance (6) Brake rotors (1) Headlight (2) Tail light (1) Air filter (2) Oil filter (1) Fuel injectors (1) Accessory kit (4) Light bulb (1) Headlight bulb (1) Engine (3) Power window motor (1) Starter motor (1) Engine oil (1) Clock (4) Front bumper (1) Brake pads (1) Tires (1) Shift knob (1) Radiator (1) Fuse box (6) Seat (2) Brake system (1) Warning light – error code (1) (2) Tire pressure warning light (1) Service warning light (8) Fuel cap (1) Cylinder head (2) Steering wheel (2)

See also:

Removing the Rear Bumper of the Peugeot 208

Follow these instructions to remove and replace the rear bumper of the Peugeot 208 in simple steps. First, open the boot and start unscrewing the fixing screws located at the top of the bumper and those for the rear lights, removing the latter; then unscrew the screws found on both sides of the rear wheel arches, as shown in the video. At this point, gently detach the bumper from the sides until it is completely removed, then replace it with the new one; refit the bumper and the rear lights!

Watch the video!


by ScegliAuto

More videos