Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Thermostat on a Mercedes C220 W203

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Thermostat

See other generations:
Video tutorial

To replace the thermostat, first drain the engine cooling system. To ensure complete drainage without keeping the system under pressure, start the engine and set the cabin heater to maximum.

Then, drain the coolant through the designated valve located under the radiator and locate the thermostat, which is at the front of the engine, next to the engine oil filter. Disconnect the hoses and remove the retaining pins, also taking off the plate behind the auxiliary belt tensioner.

After replacing the thermostat, refill the system, making sure to avoid air bubbles.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2000-2007 / W203) In this video, we show you how to replace the engine thermostat. Replacing the thermostat is necessary when the engine no longer reaches optimal oper…
Mercedes Classe C (2000-2007 / W203) In this new mini guide dedicated to your Mercedes C220, you will learn the detailed steps necessary to correctly replace the engine air filter. Befor…
Mercedes Classe C (2000-2007 / W203) This guide shows how to remove the interior rearview mirror of the Mercedes Benz C220 (W203). The operation does not require specific tools, just som…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos