|
Do it yourself
| |||
| ||||
How to change the engine oil and filter on the Opel Astra J gasoline.
Model: Vauxhall Astra
Astra J
- Years 2009-2016
Let's see how to change the oil and filter on a petrol Opel Astra J: open the hood and unscrew the oil cap. Pour in a good cleaner like LiquiMoly Pro-line, which we can find on Amazon with the code B001CZSG94 at the price of 15.18 euros, with free delivery for Prime customers. Then start the engine and let it idle for 10-15 minutes. Allow it to cool down, then unscrew the cap and let the oil drain into a large container, which we will dispose of along with the filter at an authorized center. Lift the car and place it on two jack stands; remove the undercarriage cover under the engine. The filter is located in an awkward position, on the engine side accessible from underneath the vehicle with a 24mm socket + extension + universal joint. Remove the filter and let it drain into the container; clean the seating area well and replace the cartridge and the O-ring, which we will lubricate with new oil. Reinstall the filter in its place, mount a new gasket on the oil pan; reattach the undercarriage covers and lower the car. Start by pouring about 90% of the required amount of oil into the fill cap, screw the cap back on, and let the engine run for 30-60 seconds. Turn it off, wait 2 minutes, check the oil level, and top up as necessary.
Posted on 7 January 2026 by ScegliAuto
Video tutorial
Related tutorials
Vauxhall Astra
(1998-2006 /
Astra G)
Here’s how to remove and replace the fuel filter fitted on an Opel Astra: lift the car on a column lift (jack), locate the fuel filter (as shown in t…
Vauxhall Astra
(1998-2006 /
Astra G)
How do you replace the petrol filter on your Opel Astra? Let's see how to remove the filter from under the car's floor. Lift the vehicle with a jack,…
Vauxhall Astra
(2015-2022 /
Astra K)
In this video, we will see how to change the oil filter on the Opel/Vauxhall Astra K: the filter is located in a fairly convenient position, near the…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.176
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |