Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses located in the Peugeot Partner?

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Fuse box

See other generations:
Video tutorial

The fuse boxes of the Peugeot Partner serve to contain the fuses that regulate the operation of the devices installed in the vehicle: in this type of vehicle, there are two fuse boxes. The first is located in the lower left part of the dashboard, relative to the steering column: this one contains the fuses responsible for the operation of the airbags, central locking, interior lights, etc. The second box is located on the right side of the engine compartment: here you will find the fuses that manage the operation of the low beam headlights, fuel pump, fog lights, etc.


Posted on 7 December 2025 by ScegliAuto


Related tutorials

Where are the Fuses in a Peugeot Partner?
Where are the Fuses in a Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) The fuses in a Peugeot Partner are located within dedicated fuse boxes inside the vehicle: this model has two boxes. The first is found inside the ca…
Where are the fuses located on a Peugeot Partner?
Where are the fuses located on a Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) In the Peugeot Partner, the fuses are divided among the designated fuse boxes installed in the vehicle. In this model, there are three fuse boxes. Th…
Where are the Fuses Located on a Peugeot Partner?
Where are the Fuses Located on a Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) Each fuse box in the Peugeot Partner contains fuses that manage the devices in the vehicle: there are two fuse boxes in this type of vehicle. The fir…

Other guides you may be interested in

How to Replace the Rear Light Bulb on a Citroen C5

To replace the rear light bulb on a 2015 Citroën C5, open the boot of the vehicle and remove the side carpet to access the inside of the light unit. Disconnect the light connector and remove the screw. Take out the light unit and proceed to replace the stop light bulb. Open the light housing and replace the bulb. Follow the same procedure for the right rear light bulb. Once the replacement is complete, refit the light unit, reconnect the connector, and close the side carpet. If the bulb does not work correctly, check the fuse related to the light before replacing it again.

Watch the video!


by ScegliAuto

More videos