Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 4007
    4. : How to locate fuses and know their diagrams in a Peugeot 4007

Peugeot 4007 - Video tutorial

Model: Peugeot 4007 MK 1 - Years 2007-2012
Operation: How to locate fuses and know their diagrams in a Peugeot 4007

The first fuse panel of a Peugeot 4007 car can be found inside the passenger compartment of the vehicle, exactly placed behind the dashboard at the bottom left of the steering wheel, therefore on the driver's side. This first panel contains fuses assigned to: brake lights, fog lights, diagnostic socket, central locking, audio system, display, Bluetooth system, remote key control, air conditioning, windshield wipers, instrument cluster, ABS, automatic headlight light, ignition switch, panoramic roof, parking sensor, accessory sockets, heated seats etc. Inside the engine compartment we find the second fuse box and this contains: front fog lights, horn, headlight washer, air conditioning, high beam, low beam, fuel pump, oxygen sensor, speed sensor, ignition coil etc.


Posted on 3 October 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos