Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses located in the Peugeot 406?

Model: Peugeot 406 MK 1 - Years 1995-2005
Part: Fuse box

All fuses of the Peugeot 406 are contained within the appropriate fuse boxes, which on this car model are two. The first is located in the dashboard, at the bottom left of the steering column: inside it, you can find the fuses that regulate the operation of central locking, airbags, alarm, etc. The second box is instead located on the right side of the engine compartment: inside this box, you can identify the fuses that are responsible for the operation of fog lights, windshield wipers, etc.

Posted on 28 April 2023 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse for the cigarette lighter socket of the Peugeot 406 located?
Where is the fuse for the cigarette lighter socket of the Peugeot 406 located?
Peugeot 406 (1995-2005 / MK 1) In case of malfunctioning of the cigarette lighter socket of the Peugeot 406, it is necessary to check the corresponding fuses before replacing the s…
Location of the fuse box of the Peugeot 406
Peugeot 406 (1995-2005 / MK 1) In this video we see how very often, the cause of the sudden interruption of the operation of one of the components of the electrical system of the P…
Fuse Diagram for a Peugeot 406
Fuse Diagram for a Peugeot 406
Peugeot 406 (1995-2005 / MK 1) In this very short tutorial video, all the fuse and relay diagrams are shown, divided into two specific types, for a Peugeot 406, a specific model pr…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos