Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Stalk Switch in a Peugeot 207?

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Checks and maintenance

Video tutorial

In this tutorial, you will see how to remove the stalk switch in a Peugeot 207, a very simple operation. First, disconnect the negative terminal of the battery to work safely.

Then, remove the airbag by inserting a screwdriver into the rear hole and unlocking the corresponding clip. Once done, undo the large central bolt of the steering wheel using a Torx T50 key, remove it from the steering column, and take off the cover by unscrewing the lower screws.

At this point, disconnect the stalk switch connectors, undo the rear fixing bolt, and extract it.


Updated on 27 July 2026 by ScegliAuto


Related tutorials

Instructions for Disassembling the Stalk Switch on Peugeot 207
Instructions for Disassembling the Stalk Switch on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To disassemble the stalk switch, which controls the indicators, lights, and windscreen wipers, you must first remove the steering wheel and then the …
How to Replace the Front Headlamp Bulb on the Peugeot 207
How to Replace the Front Headlamp Bulb on the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To complete the replacement of the front headlamp bulb on your Peugeot 207, follow these simple steps. First, park your Peugeot 207 on a flat surface…
How to Replace the Rear Light on a Peugeot 207
How to Replace the Rear Light on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Before you can start, open the tailgate of your Peugeot 207. Begin by moving the side carpet in the boot. Next, unscrew and remove the internal screw…

Other guides you may be interested in

    Frequently Asked Questions

    • 207 2006-2015 - Where is the inertia switch on the Peugeot 207? Read answer
    • 207 2006-2015 - Why does the Peugeot 207 give the message "auto-lock active" and does not start? Read answer
    • 207 2006-2015 - Where is the gear oil cap located in a Peugeot 207? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos