Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Peugeot Partner

Model: Peugeot Partner Tepee MK 3 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

After replacing the engine oil in the Peugeot Partner, you need to reset the system that alerts you to this important maintenance task. Sit in the driver's seat, press and hold the button on the right of the two located at the centre of the instrument panel.

Turn the key and switch on the instrument cluster; a countdown will start on the small display in the centre of the dashboard. When it reaches zero, release the button.

Turn off and then turn on the instrument cluster again; the message 'Oil OK' will confirm the operation was successful.


Updated on 9 August 2026 by ScegliAuto


Related tutorials

How to reset the service light on the 2014 Peugeot Partner
How to reset the service light on the 2014 Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) If you have a 2014 Peugeot Partner and are wondering how to perform the manual reset procedure for the service light, then all you need to do is foll…
How to restore the service light of the Peugeot Partner
Peugeot Partner Tepee (1996-2013 / MK 1) The manual procedure for resetting the service light of your Peugeot Partner only takes a few seconds to complete and all you have to do is follow th…
How to Reset the Service Light on the Peugeot Partner 3
How to Reset the Service Light on the Peugeot Partner 3
Peugeot Partner Tepee (2018-2026 / MK 3) Below, we will discover how to correctly perform the manual reset of the service light on your Peugeot Partner Mk3. Fortunately, this is a fairly sim…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos