Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Steering Wheel Controls

Model: Suzuki Swift MK 4, Rs41 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Dashboard

See other generations:
This video is currently unavailable

In this second part of the video, you will see the procedure for installing the wiring for the radio controls located on the steering wheel of a British Suzuki Swift. The dashboard with the air vent grilles has already been unclipped and remains attached only via the wiring, which you will disconnect.

From the removed section, detach the radio block using pliers; now refit the panel with the ventilation grilles while keeping the wiring socket at the height of the radio compartment. Position the internal mask of the radio block in the compartment and, using a screwdriver, secure its clips.

Now connect the steering wheel control wiring, matching the colours as per the visual sequence. The single wiring harness must be connected to the back of the new radio block; also connect the two side plugs to the back of the radio, then insert all connections into the compartment.

Before inserting the radio block, check the functionality of the steering wheel controls.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

How to change the date and time on a Suzuki Swift?
Suzuki Swift (2017-2024 / MK 6, A2L) To change the date and time on a Suzuki Swift, turn on the instrument panel without starting the engine and use the controls on the steering wheel to…
How to Replace the Brake Pads of the Suzuki Swift
How to Replace the Brake Pads of the Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) As the first step, you will need to remove the relevant wheel. After securing your vehicle on axle stands, remove the wheel and start unscrewing the …
Instructions for Installing Rear Shock Absorbers
Instructions for Installing Rear Shock Absorbers
Suzuki Swift (2004-2010 / MK 4, Rs41) Replacing the rear shock absorbers is relatively easy since the damper and spring are not co-axial; start by opening the rear hatch and removing the …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos