Do it yourself
| ||||
|
Toyota Rav 4 - Video tutorial
Model: Toyota Rav 4
MK 1, Xa10
- Years 1994-2000 How to disassemble the engine of a Toyota Rav 4? We lift the car on a column bridge placing it at the preferred height, unscrew the plug pin of the oil pan and let it flow into a container for disposal, screw the pin back on. We unscrew all the lateral plastic parts for the engine (cordless drill), unscrew the plastic of the oil pan and pull it off with a screwdriver. We unscrew the belt pins, remove the plastic panel on the engine head and remove the oil rod. We disconnect all the clamps from the pipes in the engine seats, unscrew all the pins of the cylinder head and remove it together with the gasket. We remove the air filter kit in such a way as to get to disassemble the throttle body, without removing the filter it is not possible to disassemble this. We disconnect the metal clamps of the various pipes and the various power supply terminals with pliers. Unscrew the locking pins of the engine exhaust in the lower part and carefully pull it out of the compartment. Another step to take is to disassemble the alternator with its cables, disassemble the engine chain guard with all its pins, take the chain out of its seat, now unscrew the engine head with a battery drill. We remove the battery from the engine compartment and all the electrical system disassembled up to now. We disassemble and remove the engine block. We extract the engine with chain and hoist.
Posted on 16 November 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHandbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.072
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |