Fuel Pump Replacement Instructions

Model: Toyota Celica T230 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Fuel pump

See other generations:

1999-2006 (T230)

This video is currently unavailable

Disconnect one battery terminal for safety. Unscrew the fuel tank cap to allow any accumulated gas to vent.

Lower the rear seatbacks, remove the plastic container, and unscrew the fastening pins of the rear seat to lift it and access the fuel pump housing. Remove the plastic cap protecting the pump, disconnect the fuel supply line and the feed and return pipes.

Then unscrew the flange fastening pins of the pump and extract it from the tank. Next, disconnect the float and the bucket along with all other accessory components that need to be fitted to the new pump body.

Finally, proceed in reverse for reassembly.

Updated on 5 February 2026 by ScegliAuto

Other guides you may be interested in

Body - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

Pump - Maintenance and repair on other vehicles

Fuel Pump - Maintenance and repair on other vehicles

Seat - Maintenance and repair on other vehicles

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!

by ScegliAuto

Fuel Pump Replacement Instructions

Related tutorials

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

More videos