Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to remove the headlight of a Volkswgen Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK 4, Polo IV, 9N, MK IV - Years 2001-2009
Part: Headlight
Operation: How to remove the headlight of a Volkswgen Polo

How to remove the headlight of a Volkswgen Polo with attached bumper. Let's lift the engine hood and secure it. With a socket wrench (cordless screwdriver), we unscrew the locking pins of the front bumper placed in the upper part (we remove the central mask). Once the aforementioned operation has been carried out: unscrew the pins located on the stone guards of the wheels and remove the pins located in the lower part of the bumper. We remove the bumper from the car body by hand. We unscrew the pins of the headlight (front position); we will find other pins in the lower part of the lighthouse, unscrew them from the metal plates (same operation for the pair of lights). We detach the lamp holders from the headlight and extract the same from the car body. We fit the new headlight with the new bulbs if they are damaged. AND.


Posted on 17 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Polo 2001-2009 - How do you replace the front headlight of the Volkswagen Polo 8? Read Answer
    • Polo 2001-2009 - How much does the right headlight of a Volkswagen Polo cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos