Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Valve Cover Gasket

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Cylinder head

See other generations:
Video tutorial

First, remove the support with the pipes attached to the front of the valve cover; disconnect the connectors linked to the ignition coils and the rear breather pipe; then extract the coils complete with leads; next, unscrew all the fastening screws of the valve cover (you will also need to remove the side screws that secure the timing belt cover); then pry with a screwdriver to remove the cover.

At this point, remove the old gasket and carefully clean the seating (also on the cover) before applying the new one. Apply the new gasket to the cover and proceed in reverse for reassembly, inserting the new seals around the fastening screws.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Replacing the rocker cover gasket
Replacing the rocker cover gasket
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) If oil leaks from the edges of the rocker cover, you need to replace the gasket. This is a straightforward task; simply unscrew the bolts around the …
Replacing the Rocker Cover Gasket
Replacing the Rocker Cover Gasket
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Before applying the new gasket, it is essential to thoroughly clean the gasket seats, both on the cylinder head side and the cover side: it is necess…
How to Replace the Rocker Cover on the Volkswagen Golf - Polo - Jetta 1.9 TDI
How to Replace the Rocker Cover on the Volkswagen Golf - Polo - Jetta 1.9 TDI
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this video tutorial, you will see how to remove and replace the rocker cover and gasket on the Volkswagen Golf Mk5 1.6 TDI, as well as on the Polo…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos