Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Water Pump on the Volkswagen Golf 2

Model: Volkswagen Golf Golf 2, MK 2 - Years: 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992
Part: Pump

See other generations:
Video tutorial

Open the bonnet and unscrew the coolant reservoir cap. Lift the vehicle and from underneath, locate the water pump assembly. Loosen the clamp on the coolant feed hose and drain all the fluid.

Using a socket spanner, remove the thermostat and allow any remaining fluid to escape. Loosen and remove the V-belt by loosening the tensioner nut located on the alternator.

Unscrew the bolts on the water pump pulley and loosen the two hose clamps on the other two pump feed pipes. Unscrew the mounting bolts of the pump body itself and remove it. Clean the ports and position the new pump.

Then, reassemble all components in reverse order.


Updated on 21 June 2026 by ScegliAuto


Related tutorials

How to Replace the Water Pump on a Volkswagen Golf 1.4 TSI
How to Replace the Water Pump on a Volkswagen Golf 1.4 TSI
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Below is the guide showing the procedure for removing and replacing the water pump on a Volkswagen Golf 1.4 TSI. First, open the bonnet of the vehicl…
How to Replace the Water Pump on the Volkswagen Golf 3?
How to Replace the Water Pump on the Volkswagen Golf 3?
Volkswagen Golf (1991-1997 / MK 3, Golf III, Golf 3) To replace the water pump on the Volkswagen Golf 3, open the bonnet to remove the cover from the top of the engine block. Since the water pump is loc…
Replacing the Water Pump on VW Golf 5
Replacing the Water Pump on VW Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Replace the water pump on the Golf 5. Remove some components from inside the engine bay to access the water pump. Lift the front bonnet of the car to…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos