Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Engine Management Unit

Model: Volkswagen Bora MK 6 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Windshield wipers

See other generations:
Video tutorial

The engine management unit is located just below the scuttle panel, in the centre. To remove it, first remove the plastic grille directly under the windscreen.

Start by unscrewing the fixing nuts of the wiper arms and take care to detach the arms from the spindles without damaging the splines. Once the wiper arms are removed, proceed with the removal of the plastic grille to access the engine management unit and complete its removal by disconnecting the two connectors.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Removing the Engine Management ECU
Removing the Engine Management ECU
Volkswagen Bora (1998-2005 / MK 6) The engine management ECU is located beneath the plastic grille just below the windscreen: to access the ECU, first remove the seal applied to the ed…
Removing the Suspension Wishbone
Removing the Suspension Wishbone
Volkswagen Bora (1998-2005 / MK 6) Before positioning the vehicle on axle stands, loosen the fixing bolts of the front wheel; then lift the car with a jack and position the axle stands…
Removing the External Wing Mirror
Removing the External Wing Mirror
Volkswagen Bora (1998-2005 / MK 6) To remove the external wing mirror, first detach the door panel: remove the handle cover to access the screws underneath; also unscrew the screws loc…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos