Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Bora
    4. : Disassembly of the engine management unit

Volkswagen Bora - Video tutorial

Model: Volkswagen Bora MK 6 - Years 1998-2005
Part: Control unit
Operation: Disassembly of the engine management unit

The engine management control unit is located below the plastic grille immediately below the windscreen: in order to access the control unit, it is therefore necessary to remove the gasket applied to the edge of the grille, remove the control arms of the wiper blades and remove the grille by levering it along the edges; once the seat of the engine management control unit has been intercepted, disconnect the battery even before unhooking the sockets connected to the control unit itself; once the terminal board of the control unit has been released, remove it from its seat by pulling it forward and making it slide like a drawer.


Posted on 31 August 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos