Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset of the service light for the Volvo XC40.

Model: Volvo Xc40 MK 1 - Years 2017-2026
Part: Service warning light

Today's instructions will show us the procedure to reset the service light for the regular maintenance of the engine oil change on the Volvo XC40. First, let's get inside the vehicle and start by pressing and holding the lower button located on the left side of the steering wheel; we also need to press the accelerator pedal and turn on the instrument cluster, then wait for the service warning to reset on the instrument cluster display, as shown in the video. At this point, we turn off the instrument cluster and start the engine, checking that the service has been correctly reset!

Posted on 26 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Maintenance Reminder for the Volvo XC40
Resetting the Maintenance Reminder for the Volvo XC40
Volvo Xc40 (2017-2026 / MK 1) Let's briefly discover the step-by-step instructions on how to reset the maintenance reminder light for the Volvo XC40. First, get in the vehicle and…
Reset the Service Light on the Volvo XC40
Reset the Service Light on the Volvo XC40
Volvo Xc40 (2017-2026 / MK 1) The information in this guide will allow you to reset the service light for the regular maintenance oil change on the Volvo XC40. First, get in the v…
How to Reset the Service Light on a Volvo XC40
How to Reset the Service Light on a Volvo XC40
Volvo Xc40 (2017-2026 / MK 1) Let's discover how to reset the service light for the regular maintenance oil change on the Volvo XC40. First, get in the vehicle and press and hold …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos