Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc40
    4. : How to reset the Volvo XC40 service

Volvo Xc40 - Video tutorial

Model: Volvo Xc40 MK 1 - Years 2017-2024
Part: -board computer
Operation: How to reset the Volvo XC40 service

Let's see in today's video how to reset the service in the Volvo XC40. Turn the knob to convenience mode and simultaneously press the brake and accelerator pedals and press the Engine button. Press the minus button on the left spoke (i.e. the cruise control command button). Set the next mode by turning the power knob. Keep the left button pressed for 10 seconds and then you will see the symbol flash in the on-board computer; now you can release the button. The procedure will be finished and you will no longer have the message in the instrumentation of your car.


Posted on 20 April 2024 by ScegliAuto



How to reset the service on the Volvo XC40?
Volvo Xc40 (2017-2024 / MK 1) In this tutorial, we can see how to reset the service in the Volvo XC40, an extremely simple and quick operation, to be done only once all the requir
How to reset the "Service" light on a Volvo XC40
Volvo Xc40 (2017-2024 / MK 1) Before we can begin, we will have to go and sit in the driver's seat of our Volvo XC40. Let's start by activating the instrument panel, but without s
How to reset the service in the Volvo XC40?
Volvo Xc40 (2017-2024 / MK 1) Resetting the service in the Volvo XC40, as we can see in this tutorial, is an extremely simple and fast operation. Before proceeding, make sure you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos