Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Rear Brake Pads and Rotors

Model: Volvo S60 MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Brake pads

See other generations:
Video tutorial

Lift the vehicle on appropriate jack stands and remove the rear wheel; disconnect the retaining spring of the pads, pry between the rotor and the pads to slightly retract the piston, loosen the mounting pins of the brake caliper from the respective bracket and remove it by pulling out the old pads; fully retract the piston in the caliper by pressing it with a channel lock pliers; then remove the caliper bracket and the rotor mounting bolt to take it off; clean the rotor seat on the hub and sand the shoes, then wash everything with appropriate brake cleaner; also wash the new rotor to remove the protective oil, clean the caliper bracket, apply copper grease to the caliper mounting pins, and proceed in reverse for installation starting with the rotor, then the caliper bracket, inserting the new pads, and finally the caliper.

Apply copper grease to the sliding surface of the pads and on their backs to prevent them from vibrating and generating that annoying squeal; pump the brake pedal until it offers the right resistance and pay attention during the first braking.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Volvo S60 (2000-2009 / MK 1) Remove the brake caliper using a ratchet wrench by unscrewing the two rear bolts. Disassemble the caliper bracket in the same way. Use a wrench to un…
Volvo S60 (2000-2009 / MK 1) Remove the front wheels and start by disconnecting the outer retaining spring on the caliper. Remove the protective caps from the caliper mounting pi…
Volvo S60 (2019-2026 / MK 3) In this guide, we will discover the useful instructions for disassembling and replacing the outer handle of the rear door of the Volvo S60. First, le…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos