|
Do it yourself
| |||
| ||||
How to reset the "Service" light on a Volvo XC90?
Model: Volvo Xc90
MK 2
- Years 2015-2026
To reset the "Service" light on a Volvo XC90, start by turning on the instrument panel without starting the engine. Use the buttons on the steering wheel to access the onboard computer menu. Navigate through the options until you find the section dedicated to maintenance. Once you have located this section, select the option related to maintenance and follow the instructions on the display to complete the reset. Hold down the indicated button until the reset is complete and the light turns off. This procedure ensures that your vehicle's maintenance monitoring system is up to date and that the service reminder has been properly reset. Before performing this procedure, it is important that you have completed the scheduled service recommended by the manufacturer. If you do not follow the instructions on the display, the reset may not be completed correctly, so make sure to pay attention to each step. Resetting the "Service" light is a simple operation that can be done independently, but it is always advisable to consult the owner's manual for any specific details related to your car model. This will ensure that you keep your vehicle in perfect working condition and follow the manufacturer's recommendations for periodic maintenance.
Posted on 28 July 2024 by ScegliAuto
Video tutorial
Related tutorials
Volvo Xc90
(2015-2026 /
MK 2)
To reset the "Service" light on a Volvo XC90, turn on the instrument panel without starting the engine by pressing the "Start" button. Use the button…
Volvo Xc90
(2015-2026 /
MK 2)
It will be possible to reset the Service light that appears on the instrument panel of the Volvo XC90 by holding down the button - located on the lef…
Volvo Xc90
(2015-2026 /
MK 2)
The Service indicator that is shown on the display of the Volvo XC90 can be reset by pressing and holding the - button located on the left side of th…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.104
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
