Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Mito
    4. : How to know the fuse diagram of a 2014 Alfa Romeo Mito.

Alfa Romeo Mito - Video tutorial

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Operation: How to know the fuse diagram of a 2014 Alfa Romeo Mito.

The 2014 Alfa Romeo Mito car has three fuse boxes; the first is located inside the vehicle cabin, the second is inside the engine compartment, and the third box is situated inside the trunk. The first box has fuses assigned to: audio system, radio, Bluetooth, diagnostic port, air conditioning control system, TPMS, instrument panel, alarm sensor, alarm siren, navigator, electric windows, cigarette lighter, parking sensors, light control, etc. The second box has fuses assigned to: horn, air conditioning compressor, defrosting system for windows, fuel pump, fog lights, electric door lock system, HI-Fi system, etc. Finally, the third box has fuses assigned to: front seat heating, trunk opening, and electric roof opening system.


Posted on 11 June 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Mito 2008-2018 - What are the Alfa Mito's most common problems? Read Answer
    • Mito 2008-2018 - What does DST not available in an Alfa Romeo Mito mean? Read Answer
    • Mito 2008-2018 - What does the engine warning light mean on the Alfa Romeo Mito? Read Answer
    • Mito 2008-2018 - Why does the Alfa Romeo Mito boot button not work? Read Answer
    • Mito 2008-2018 - Why doesn't Alfa Mito's DNA work? Read Answer
    • Mito 2008-2018 - How much can the used Alfa Romeo MiTo cost? Read Answer
    • Mito 2008-2018 - How many kilometers can an Alfa Romeo Mito travel with a full tank? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos