Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Sail
    4. : How to locate and understand the fuse diagrams in a Chevrolet Sail

Chevrolet Sail - Video tutorial

Model: Chevrolet Sail MK 2 - Years 2010-2017
Operation: How to locate and understand the fuse diagrams in a Chevrolet Sail

The first fuse panel that we can locate in a Chevrolet Sail car is found in the vehicle's cabin, behind the glove compartment next to the instrument panel; this first block contains fuses assigned to: cigarette lighter, central locking, display, ECM, ABS, brake lights, emergency lights, audio system, windshield defroster, fan, interior lights, sunroof, etc. In the engine compartment, we can locate the next fuse block, precisely located at the right end of the compartment; this fuse box contains: ignition coil, high beams, low beams, air conditioning compressor, ABS, parking lights, rear window defroster, ECU, injectors, TCM, cooling fan, battery, etc.


Posted on 7 July 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos