Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Sail
    4. : How to locate the fuses and know the fuse diagrams in a Chevrolet Sail

Chevrolet Sail - Video tutorial

Model: Chevrolet Sail MK 3 - Years 2014-2023
Operation: How to locate the fuses and know the fuse diagrams in a Chevrolet Sail

The first fuse panel of a Chevrolet Sail car can be found inside the passenger compartment of the vehicle, exactly behind the plastic cover on the side of the instrument panel, on the driver's side. This panel contains fuses assigned to: ignition switch, electric steering lock, airbag, HVAC, rain sensor, accessory sockets, etc. Inside the engine compartment, located at the left end we find the next fuse box; this contains: brake lights, washer pump, high beam, low beam, fog lights, ABS pump, ABS flywheel, wipers, sunroof, injectors, fuel pump, horn, ignition coil, cooling system, air conditioning compressor, rear window defroster , etc. Finally, in the trunk we can find the last fuse panel and this contains: radio, battery, amplifier, solenoid, assisted parking, cigarette lighter, etc.


Posted on 12 December 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos