Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil Filter on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Engine oil

Let's see how to replace the engine oil on a Fiat Panda. Follow this procedure: lift the car with a column lift and unscrew the oil sump bolt, allowing the oil to drain into a container (tighten the bolt at the end of draining). Use a strap wrench to unscrew the oil filter, remove it, and position a new one, ensuring it adheres well around the thread. Lower the car back to the ground, then open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, and lift the front bonnet, secure it, and top up with new oil.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Changing the Engine Oil in a Fiat Panda
Changing the Engine Oil in a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How do you change the used engine oil in a Fiat Panda? Lift the car on a column lift or jack, remove the plastic cover panel under the engine bay if …
Engine Oil Replacement for Fiat Panda
Engine Oil Replacement for Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Replace the oil and filter on a Fiat Panda. Start by opening the car door and pulling up the engine compartment release lever located at the bottom l…
How to Replace the Engine Oil Filter on a Fiat Panda 1.3 Multi-Jet
How to Replace the Engine Oil Filter on a Fiat Panda 1.3 Multi-Jet
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, open the bonnet of your Fiat Panda 1.3 Multi-Jet. The oil filter is located near the oil filler neck. Begin by loosening the oi…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2003-2012 - How much engine oil does the fuel tank of the Panda 1 2 petrol contain? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos