|
Do it yourself
| |||
| ||||
Ford Mondeo Mk5: how to reset the battery management system (BMS)
Model: Ford Mondeo / Fusion
MK 5
- Years:
2022, 2023, 2024, 2025, 2026
Video tutorial
After replacing the battery in the Ford Mondeo Mk5, it is advisable to reset the BMS system, which is the module that monitors the state of charge of the battery. This operation takes place entirely from the cabin, without diagnostic tools. Start with the car stationary, the gear in the park position, and the parking brake engaged. The lights and other electrical accessories should be turned off. While seated in the driver's seat, keep your feet ready on the pedals and press the start button without starting the engine, so that only the dashboard lights up: the dashboard display illuminates, and the usual warning lights remain on. At this point, execute the reset sequence, which in the video is shown by pressing the pedals in the footwell (brake and accelerator) down fully and holding them pressed with the ignition on for a few seconds. During the wait, the dashboard remains normally illuminated. After the necessary time, release the pedals and turn off the ignition with the start/stop button. Upon the next ignition, the BMS system of the Ford Mondeo Mk5 will be updated to the new battery, and the charging management will function correctly again.
Posted on 30 November 2025 by ScegliAuto
Related tutorials
Ford Mondeo / Fusion
(2022-2026 /
MK 5)
In today's video, you will see how to reset the BMS, or Battery Monitoring System, on a Ford Mondeo, fifth generation model produced from 2022 onward…
Ford Mondeo / Fusion
(2022-2026 /
MK 5)
Replacing the battery on the Mondeo MK5 (2.0 diesel) requires removing the air filter to access the mounting. Disconnect the connectors and the brack…
Ford Mondeo / Fusion
(2014-2021 /
MK 4)
The video shows how to reset the BMS system, which is the battery monitoring system, on a 2015 Ford Mondeo. This is a simple operation that can be co…
Other guides you may be interested in
|
How to open the boot if it is stuck on a Mercedes B-Class?
On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.077
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |