Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove Battery on Ford Kuga

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Battery

See other generations:
Video tutorial

Replacing a faulty battery on a Ford Kuga? Remove the battery from the engine bay. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the bonnet and secure it. You will find the battery inside the engine bay (located under the panel near the windscreen).

Remove the plastic panel near the windscreen: detach the cover panel.

Remove the securing bolts of the battery terminals, then take out the battery from the engine bay and replace it with a new one (same voltage). Close the bonnet after maintenance.

Test the engine operation.


Updated on 21 March 2026 by ScegliAuto


Related tutorials

Replacing the Battery in a Ford Kuga
Replacing the Battery in a Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) Today, let's go through the instructions on how to remove and replace the battery in a Ford Kuga by following these simple steps. First, open the bon…
How to Replace the Key Battery in a Ford Kuga
How to Replace the Key Battery in a Ford Kuga
Ford Kuga (2020-2026 / MK 3) Before learning how to correctly replace the battery in your Ford Kuga Mk3 key, ensure you have a small flathead screwdriver and a new battery of the…
How to Replace the Key Battery in a Ford Kuga
How to Replace the Key Battery in a Ford Kuga
Ford Kuga (2008-2012 / MK 1, C394) To replace the button battery inside your Ford Kuga key (first series, 2008-2012), follow these steps. First, ensure you have a flat-head screwdriver…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos