Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Oil Change Message on the Ford Escape Mk2

Model: Ford Escape MK 2 - Years: 2008, 2009, 2010, 2011, 2012
Part: Warning light – error code

See other generations:
Video tutorial

This guide shows how to reset the oil change light on the Ford Escape Mk2. This procedure can be performed with the engine running. To complete the procedure, operate the buttons on the left side of the steering wheel, at the bottom of the dashboard.

Press the "INFO" button or the "SETUP" button until the next instruction appears. You will need to press the "RESET" button to complete the reset of the light.

At this point, by pressing the "SETUP" button and then "RESET", you can reset the engine oil life to 100%. Turn off the instrument cluster and then turn it back on to check that the operation has been completed correctly.


Updated on 8 May 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Service Light on a Ford Escape?
How to Reset the Oil Service Light on a Ford Escape?
Ford Escape (2013-2019 / MK 3) On the Ford Escape, after changing the oil and the corresponding filter, you need to reset the oil service light. First, turn on the ignition without…
Resetting the Service Light on Ford Escape MK3
Resetting the Service Light on Ford Escape MK3
Ford Escape (2013-2019 / MK 3) As you approach the mileage for the engine oil and filter replacement on the Ford Escape, a light will illuminate on the dashboard to remind you. Aft…
How to Reset the Oil Light on a Ford Escape 2
How to Reset the Oil Light on a Ford Escape 2
Ford Escape (2008-2012 / MK 2) If the oil light on the instrument cluster of your Ford Escape Mk2 (2008-2012) turns on despite having recently changed the oil and filter, you need …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos