|
Do it yourself
| |||
| ||||
How to Perform a Service and Reset the Service Light on a Ford C-Max
Model: Ford C Max
MK 1
- Years 2003-2010
Before starting the reset procedure for the service light on the Ford C-Max, ensure a complete service is carried out at an authorised workshop. A complete service includes: removing and topping up engine oil, changing the oil filter, changing the air filter, checking brakes, and much more. Start by removing the oil cap and take off the tube that blocks access to the oil filter. Next, remove the oil sump located under the car and let the old oil drain out. Once the oil has finished draining, replace the sump. Now, add the new oil and change the corresponding filter. Just like the oil filter, also change the air filter. Check all other components of the car and reassemble what you have removed. Now, proceed to remove and replace the cabin filter. The filter is located under the glove compartment, so you will need to unscrew the two clips before you can remove it. Once you have completed the service, move on to resetting the service light. To reset, turn on the instrument panel and simultaneously press the brake and accelerator pedals for about 60 seconds. When the light goes out, it means the reset was successful.
Updated on 27 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Ford C Max
(2010-2019 /
MK 2)
In this tutorial, you will see how to reset the service light in the Ford C-MAX, a very simple and quick operation to perform only after completing a…
Ford C Max
(2010-2019 /
MK 2)
In this video tutorial, see how to reset the service light on a 2017 Ford C-Max by following a few simple steps that will allow you to manage your ve…
Ford C Max
(2010-2019 /
MK 2)
Let's see how to reset the service light on a Ford C-Max. Turn on the ignition without starting the engine, just the ignition on. Press the brake ped…
Other guides you may be interested in
|
How to Remove the Front Bumper of the Citroën C4 Picasso?
To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.584
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |