Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Ford S Max

Model: Ford S Max MK 1 - Years 2006-2016
Part: Service warning light

Your Ford S Max, like all other vehicles, requires scheduled maintenance, including oil changes, oil filter replacements, timing belt changes with the relevant kit, tensioner, bearing, water pump, and so on. It is impossible to forget these tasks, as the service light is programmed to illuminate at a specific mileage. However, after completing the aforementioned work, the light must be reset. To do this, press the brake and accelerator pedals, turn on the ignition, wait about fifteen seconds, and then turn off the ignition. Operation completed.

Updated on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Ford S-Max?
How to Reset the Service Light on a Ford S-Max?
Ford S Max (2006-2016 / MK 1) To reset the service light on a Ford S-Max, insert the ignition key into the corresponding lock to turn on the instrument cluster. Once it is on, pre…
How to Reset the Service Light on a Ford S-MAX
How to Reset the Service Light on a Ford S-MAX
Ford S Max (2006-2016 / MK 1) In this short tutorial, see how to reset the service light on a first-generation Ford S-MAX, produced from 2006 to 2016. Resetting this light is very…
How to Reset the Service Light on a Ford S-Max
How to Reset the Service Light on a Ford S-Max
Ford S Max (2006-2016 / MK 1) Today's instructions will allow you to reset the service light for the regular maintenance oil change on the Ford S-Max. First, get in the vehicle an…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos