Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Chevrolet
  4. :
  5. Captiva
  6. : How to know the fuse diagram of a 2008 Holden Captiva.

Chevrolet Captiva - Video tutorial

Model: Chevrolet Captiva CG - Years 2006-2016
Operation: How to know the fuse diagram of a 2008 Holden Captiva.

The 2008 Holden Captiva car has two fuse boxes, one located inside the vehicle cabin and the other located in the engine compartment. The first fuse box contains fuses assigned to: mirrors, door locks, cigarette lighter, electric windows, TCM, audio system, air conditioning, instrument panel, clock, ignition switch, BCM, airbag, front wipers, etc. The second fuse box contains fuses assigned to: ECM, air conditioning compressor, fuel pump, horn, brake lights, battery, electric sunroof, ABS, high beams, low beams, fog lights, TCM, etc.


Posted on 11 June 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos