Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset a Jeep Wrangler

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Warning light – error code

See other generations:
Video tutorial

In this video tutorial, see how to reset a Jeep Wrangler. First, perform an oil change on your vehicle; then, get into your vehicle and sit in the driver's seat.

Insert the key and turn on the instrument cluster (do not start the engine) and check that the service light is on. Using the left buttons on the steering wheel, scroll to find the service option. Press the accelerator pedal three times in a row. Turn the key to switch off the instrument cluster; at this point, the oil light is reset.

You can turn on the ignition again to check that the service light is off.


Updated on 13 May 2026 by ScegliAuto


Related tutorials

How to reset the oil light on the 2025 Jeep Wrangler
How to reset the oil light on the 2025 Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) If you want to find out how to manually reset the engine oil light on your new Jeep Wrangler (year 2025), all you have to do is read the following st…
How to Reset the Maintenance Light on a Jeep Wrangler Mk3
How to Reset the Maintenance Light on a Jeep Wrangler Mk3
Jeep Wrangler (2007-2018 / JK, MK 3) In this guide for your Jeep Wrangler Mk3 (2007-2018), we will describe all the steps necessary to correctly complete the manual reset of the maintena…
How to Reset the "Tyre Pressure" Light on a Jeep Wrangler
How to Reset the "Tyre Pressure" Light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Before you begin, sit in the driver's seat of your Jeep Wrangler. Start by adjusting the tyre pressures according to the recommended values indicated…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos