Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Engine oil

See other generations:
Video tutorial

Lift the vehicle on suitable ramps; open the hood and remove the plastic engine cover: at the front, in the center position, is the oil filter housing. Position a drain pan of appropriate capacity under the oil pan and remove the drain plug after taking off the splash shield; use the appropriate socket wrench to unscrew the filter housing cap, pull out the old cartridge, and insert the new one, also replacing the set of O-rings.

Finally, fill the engine with new oil according to the SAE specifications and the quantities indicated in the owner's manual.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Replacing Engine Oil and Oil Filter
Replacing Engine Oil and Oil Filter
Mercedes Classe C (1993-2000 / W202) Before starting, obtain the oil and the original replacement filter, then lift the car and secure it with appropriate supports so it cannot fall. The…
Changing Engine Oil and Oil Filter
Changing Engine Oil and Oil Filter
Mercedes Classe C (1993-2000 / W202) Lift the vehicle and secure it with appropriate supports to prevent it from falling. The necessary tools are a ratchet wrench, a set of open-end wren…
Engine Oil and Oil Filter Replacement
Engine Oil and Oil Filter Replacement
Mercedes Classe C (1993-2000 / W202) Lift the vehicle on suitable car ramps or position it over a service pit to access the oil pan. Open the hood and locate the oil filter container: it…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos