Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Partner Tepee
    4. : Where are the fuses located in the Peugeot Partner?

Peugeot Partner Tepee - Video tutorial

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Fuse box
Operation: Where are the fuses located in the Peugeot Partner?

On the Peugeot Partner, the fuses are divided inside fuse boxes that are installed on the vehicle: in this car model, it is possible to identify two boxes. The first one is located in the lower left part of the dashboard, next to the steering column: it contains the fuses that are responsible for the operation of the airbags, central locking, rear wiper, etc. The second box is located on the right side of the engine compartment and can be accessed by opening the hood: here, there will be fuses that are responsible for the operation of the low beam headlights, fuel pump, etc.


Posted on 30 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Partner Tepee 2018-2028 - What is the purpose of the fuse diagram in the 2022 Peugeot Partner? Read Answer
    • Partner Tepee 2008-2018 - What is the position of the starter motor fuse in the Peugeot Partner? Read Answer
    • Partner Tepee 2018-2028 - Where is the radio fuse located on the Peugeot Partner? Read Answer
    • Partner Tepee 2008-2018 - Where is the horn fuse located on the Peugeot Partner Tepee? Read Answer
    • Partner Tepee 2018-2028 - Peugeot Partner fuse diagram? Read Answer
    • Partner Tepee 2008-2018 - Where is the Peugeot Partner car radio fuse located? Read Answer
    • Partner Tepee 2008-2018 - Where is the Peugeot Partner fuse box located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos