Do it yourself
Frequently asked questions about cars and motorcycles

Where Are the Fuse Boxes on a Toyota Avensis?

Model: Toyota Avensis T250, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Fuse box

See other generations:
Video tutorial

Today we will see the location of the fuse boxes in a Toyota Avensis model T 250. The first fuse box is located under the bonnet. Specifically, the box is installed in the right compartment between the engine and the battery.

Inside, you will find all the fuses that control the electronic parts of the engine, such as: the fuel pump, the water pump, the starter motor, the battery, and so on. The second fuse box is located inside the cabin. Specifically, the box is installed in the right side dashboard.

Inside, you will find all the fuses that control the electronic parts of the cabin, such as the vehicle lights, front and rear headlamps, airbag, horn, and so on. An additional box with higher amperage relays is located under the bonnet next to the left front headlamp.


Posted on 10 April 2026 by ScegliAuto


Related tutorials

Toyota Avensis (2009-2018 / MK 3, T270) In this video, we can see where the fuse boxes of the Toyota Avensis are located and the corresponding diagrams, which are useful in case we need to …
Toyota Avensis (2009-2018 / MK 3, T270) The fuse boxes of the Toyota Avensis contain the fuses that regulate the operation of the devices: in this type of vehicle, there are two fuse boxes.…
Toyota Avensis (2003-2008 / T250, MK 2) In this video, you can see where the fuse boxes of the Toyota Avensis are located and their respective diagrams, useful in case you need to check the…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos