Do it yourself
Frequently asked questions about cars and motorcycles

Where is the refill nozzle for the power steering fluid located on the Volkswagen Polo?

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Checks and maintenance

See other generations:
Video tutorial

Accessing the power steering reservoir on the Volkswagen Polo 9N is anything but obvious, as it is located in the engine compartment, beneath the battery. It is a tank with a green cap, mounted directly on the side of the power steering cylinder, found at the rear right of the engine compartment, underneath and behind the battery group.

We start by disconnecting the battery, always beginning with the negative terminal. Next, we unscrew the battery hold-down bolt, which is quite heavy (about 20 kg). We firmly grasp the battery by the designated handles and lift it upwards.

Underneath the battery, there is often a plastic tray secured with clips, which we will need to detach. The reservoir is cylindrical, and depending on the version, it is either made of metal or black plastic, with a large green screw cap connected to the steering pump by a hose.

To top up, we should only use the fluid specified by Volkswagen, G 001 000, known as Pentosin or CHF22S; we should never use ATF, which is the generic red automatic transmission fluid that would damage the system.


Posted on 19 December 2025 by ScegliAuto


Related tutorials

Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this video, see where the power steering fluid reservoir is located on a Volkswagen Polo, useful if you need to top it up. As shown, the reservoir…
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) The video tutorial presented here explains in detail not only how to top up the power steering fluid but also how to replace it if desired. After ope…
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Here are the main steps to dismantle and replace the power steering on a Volkswagen Polo. First, raise the vehicle and begin by removing the front ri…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos