Do it yourself
Frequently asked questions about cars and motorcycles

How to Disable the Start and Stop System on a Volkswagen Golf

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Checks and maintenance

Before you start, sit in the driver's seat of your Volkswagen Golf. Begin by starting the engine by turning the key in the ignition. Next, press and hold the clutch pedal fully down for ten seconds. Once the 10 seconds have passed, release the pedal. When you release the clutch pedal, the phrase "Start and Stop disabled" will appear on the digital instrument cluster, and you will have successfully completed the process.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2019-2026 / Golf 8, MK 8, Golf Viii) In this article, we will see how to deactivate the start and stop system of the Volkswagen Golf 8 in order to preserve the battery. The procedure is …
Volkswagen Golf (2019-2026 / Golf 8, MK 8, Golf Viii) Today we will see the main instructions that will allow us to deactivate or activate the Start&Stop system of the Volkswagen Golf at any time. First …
Volkswagen Golf (2019-2026 / Golf 8, MK 8, Golf Viii) The instructions in this guide will show you how to disable and enable the Start&Stop system on the Volkswagen Golf. First, get into the vehicle and …

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos