Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Checking Cylinder Compression

Model: Volkswagen Transporter MK 4, T4 - Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Checks and maintenance

See other generations:
Video tutorial

To check the condition of the piston seals and thus the cylinder compression, connect the appropriate manometer to the spark plug sockets. First, create some working space by slightly moving the radiator: unscrew the mounting pins from the grille and lift it slightly.

At this point, disconnect the leads from the spark plugs, blow on the sockets to remove any dirt that may enter the cylinders, and remove the spark plugs; then attach the manometer to the first cylinder, disconnect the camshaft sensor to prevent the ECU from firing the ignition and attempting to start the engine: the manometer needle will remain at the maximum pressure value measured.

Repeat the operation on the other cylinders.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

How to Replace the Suspension Springs on a Volkswagen Transporter T5?
How to Replace the Suspension Springs on a Volkswagen Transporter T5?
Volkswagen Transporter (2003-2014 / T5, MK 5) Learn how to replace the shock absorber springs on a Volkswagen Transporter T5: first, lift the vehicle off the ground after loosening the wheel bolt…
Replacing Valve Pushrod Seals
Replacing Valve Pushrod Seals
Volkswagen Transporter (1990-2003 / MK 4, T4) An overhead valve (OHV) engine is one where the valves are located in the cylinder head, and the camshaft that operates them is generally positioned …
How to Change the Front Headlamp Bulb on a Volkswagen Transporter
How to Change the Front Headlamp Bulb on a Volkswagen Transporter
Volkswagen Transporter (2003-2014 / T5, MK 5) To replace the front headlamp bulb on a Volkswagen Transporter, open the bonnet and locate the rear of the headlamp unit. Remove the protective cover…

Other guides you may be interested in

    Frequently Asked Questions

    • Transporter 2014-2025 - Where is the OBD port located on the Volkswagen Transporter? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos