Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the timing belt of the Volvo S90 2.0 D4.

Model: Volvo S90 MK 1 - Years 2017-2024
Part: Timing belt

The main instructions in this guide will allow us to disassemble and replace the timing belt of the Volvo S90 2.0 D4. First, we raise the vehicle and begin by removing the right front wheel and the wheel arch; then we proceed to remove the engine mount and the timing cover, disconnecting the V-belt, as shown in the video. At this point, we insert the timing belt locking tool to later remove the timing belt, taking the necessary references useful for the subsequent timing; we also replace the water pump if necessary.

Posted on 28 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Volvo S90?
How to Reset the Service Light on the Volvo S90?
Volvo S90 (2017-2024 / MK 1) In this tutorial, you will see how to reset the service light on the Volvo S90, a very simple and quick operation to be performed only after completi…
How to Program the Remote and Key for a Volvo S90
How to Program the Remote and Key for a Volvo S90
Volvo S90 (2017-2024 / MK 1) Today, you will learn the instructions to program the remote and key for the Volvo S90. To program the key and remote, you will need a specific progr…
How to Reset the Service Light in a Volvo S90?
How to Reset the Service Light in a Volvo S90?
Volvo S90 (2017-2024 / MK 1) In this tutorial, you will learn how to reset the service light in a Volvo S90, a very simple and quick operation to perform only after completing al…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos