Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Assembling the Engine of the Classic Fiat 500

Model: Fiat 500 Epoca - Years 1957-1975
Part: Engine

In this video tutorial, you will see step-by-step instructions for assembling the twin-cylinder engine of the classic Fiat 500 after a proper overhaul and maintenance. First, install the bearings and seals onto the engine casing, ensuring everything is lubricated correctly; then position the cylinder head along with the relevant part of the timing chain, as illustrated in the video. At this point, fit the cylinder head and adjust the valve clearance; next, move on to installing the clutch and flywheel, following the video until the end!

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Timing Instructions for Classic Fiat 500
Timing Instructions for Classic Fiat 500
Fiat 500 (1957-1975 / Epoca) Let’s look at some important instructions for timing the two-cylinder engine of a classic Fiat 500. First, find the top dead centre by rotating the c…
How to Refit the Engine on the Classic Fiat 500
How to Refit the Engine on the Classic Fiat 500
Fiat 500 (1957-1975 / Epoca) In this tutorial, you will find the instructions to refit the entire engine block onto the body of the classic Fiat 500. First, open the rear bonnet …
How to mount the eyelids on the front headlights of a vintage Fiat 500
How to mount the eyelids on the front headlights of a vintage Fiat 500
Fiat 500 (1957-1975 / Epoca) In this video we can see how easy it is to mount a truly fascinating and classy accessory on our vintage Fiat 500: eyelids on the headlights. First o…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos