Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Ford Galaxy

Model: Ford Galaxy MK 2 - Years 2006-2015
Part: Warning light – error code

After replacing the engine oil and filter on this vehicle, you need to reset the service light if it is illuminated on the dashboard. To do this, follow the instructions in the video and this description. Sit in the driver's seat and turn on the ignition, then press and hold the accelerator and brake pedals simultaneously for at least 15 seconds. The display will show an indication that the reset is in progress. After 15 seconds, release the pedals and then press 'OK' on the button located on the right side of the steering wheel, at which point the service light will turn off.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Ford Galaxy?
How to Reset the Service Light on a Ford Galaxy?
Ford Galaxy (2006-2015 / MK 2) To reset the Service light on a Ford Galaxy, turn on the ignition by inserting the key into the ignition switch. Once the dashboard is lit, press and…
How to Reset the Service Light on a Ford Galaxy
How to Reset the Service Light on a Ford Galaxy
Ford Galaxy (2006-2015 / MK 2) In this short video tutorial, you will learn how to reset the service light on a second-generation Ford Galaxy. To perform the reset, first, turn on …
How to Reset the Service Light on a Ford Galaxy?
How to Reset the Service Light on a Ford Galaxy?
Ford Galaxy (2015-2023 / MK 3) As shown in this tutorial, resetting the service light on a Ford Galaxy is an extremely simple and quick operation. Ensure you have completed all req…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos