Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the MAF Sensor on the Peugeot 3008 Hybrid?

Model: Peugeot 3008 P64 - Years 2023-2026
Part: Checks and maintenance

For the Peugeot 3008 Hybrid with the 1.6 Puretech petrol+electric engine, the MAF (mass air flow) sensor is located in a slightly different position compared to cars with only an internal combustion engine. After opening the engine compartment, locate the engine block; the MAF sensor is situated between the throttle body and the air filter. It is mounted directly on the filter housing, immediately after the filter itself and before the pipe that leads air to the throttle body and turbocharger. It is a black plastic cylinder with an electrical connector and a protective grille inside the duct.

Posted on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the ECU located in the Peugeot 3008 Hybrid?
Where is the ECU located in the Peugeot 3008 Hybrid?
Peugeot 3008 (2016-2023 / MK 2, P84) In this tutorial, you can see where the engine ECU is located in the Peugeot 3008 Hybrid, useful if you need to replace it. As shown, the ECU is posi…
Where are the fuse boxes of the 2024 Peugeot 3008 located?
Where are the fuse boxes of the 2024 Peugeot 3008 located?
Peugeot 3008 (2023-2026 / P64) The Peugeot Hybrid 3008 from 2024 has two fuse boxes inside. The first fuse box is located inside the front hood; as explained in the video tutorial,…
How do you reset the oil service on a Peugeot 3008 Hybrid?
How do you reset the oil service on a Peugeot 3008 Hybrid?
Peugeot 3008 (2023-2026 / P64) In today's very short video guide, you will see how to perform a reset of the service on a latest generation Peugeot 3008 Hybrid in a few simple step…

Other guides you may be interested in

    Frequently Asked Questions

    • 3008 2016-2023 - What does the message "Anti-pollution system fault" mean in the Peugeot 3008? Read answer
    • 3008 2009-2016 - Why does the display of the Peugeot 3008 not work? Read answer
    • 3008 2016-2023 - Why does the Peugeot 3008 screen not light up? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos