Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of Engine Oil, Oil Filter, and Brake Pads

Model: Volkswagen Passat 3BG, B5 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Oil filter

See other generations:
Video tutorial

Open the front bonnet and ensure it is securely supported. Unscrew the fixing bolts of the plastic engine cover and remove it. Place a suitable capacity plastic container (approximately 5 litres) under the oil sump to collect the used oil, then unscrew the drain plug located on the side.

During this phase, locate the oil filter (cartridge filter) in the engine compartment near the coolant reservoir: unscrew the cap, remove the old cartridge, and insert the new one; before re-screwing the cap, replace the O-ring seals and lubricate them with oil. Then, re-screw the drain plug after replacing the copper washer and fill the engine with new oil according to the SAE specifications and quantities indicated in the user manual.

Next, to replace the rear brake pads, lift the vehicle, remove the wheel and the fixing bolts of the brake caliper (located at the rear) and remove the old pads and disc.

Use a wire brush to remove any oxidation residues, fit the new disc onto the hub, insert the new pads, and reposition the caliper, tightening the respective fixing bolts.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Volkswagen Passat (1996-2005 / 3BG, B5) This video shows step by step how to remove and replace the engine oil and its filter. First, it is advisable to perform this task with the car semi-…
Volkswagen Passat (1996-2005 / 3BG, B5) The oil filter is located just above the oil sump: to perform this maintenance, it is advisable to lift the vehicle on a hydraulic lift to access the…
Volkswagen Passat (1996-2005 / 3BG, B5) Open the bonnet and locate the engine oil reservoir. Remove the undertray located beneath the engine that covers the oil drain hole. Place a containe…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos