Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Shock Absorbers

Model: Volkswagen Passat 3BG, B5 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Suspension system

See other generations:
Video tutorial

If you need to replace the front shock absorbers, it is essential to have the appropriate clamps to compress the spring. First, lift the vehicle on a ramp, remove the front wheel, and the mounting bolts of the shock absorber from the suspension arm. Then, access the engine bay, remove the plastic grille just below the windscreen, and unscrew the nuts securing the shock absorber mount to the body shell.

Once the shock absorber is removed, apply the clamps to the spring and compress it enough to complete the removal of the mount from the shaft. Move the spring seating plate and bellows onto the new shock absorber, insert the spring, and reattach the mount before releasing the spring.

Proceed in reverse for installation back onto the vehicle.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Replacement of Front Shock Absorber Springs
Replacement of Front Shock Absorber Springs
Volkswagen Passat (1996-2005 / 3BG, B5) To replace the front shock absorber springs, you must remove the shock absorbers themselves; lift the vehicle on a hydraulic lift and remove the fron…
How to Replace the Gas Struts on the VW Passat B6 Boot
How to Replace the Gas Struts on the VW Passat B6 Boot
Volkswagen Passat (2005-2010 / B6, 3C) The support pistons for the rear boot lid are actually gas struts. Over time, the internal seals may deteriorate, causing gas to escape and consequen…
Shock Absorber Mount Replacement
Shock Absorber Mount Replacement
Volkswagen Passat (1996-2005 / 3BG, B5) If you hear a squeaking noise from the engine bay that increases while driving on uneven surfaces, it is likely that the shock absorber mount has fai…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos