Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Volkswagen Touran

Model: Volkswagen Touran 1T, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

After changing the engine oil and oil filter, completing the routine maintenance service, you need to reset the inspection warning that appears on the instrument cluster. Get into the vehicle and turn on the ignition; you will see a prompt on the small display asking to reset the service light, which you should confirm by pressing the OK button on the steering wheel controls, as shown in the video.

At this point, turn off the ignition and finally start the engine to complete the reset operation!


Updated on 9 August 2026 by ScegliAuto


Related tutorials

Resetting the Maintenance (Service) Light on the Volkswagen Touran
Resetting the Maintenance (Service) Light on the Volkswagen Touran
Volkswagen Touran (2015-2024 / 5T, MK 2) Below are the instructions that will allow you to reset the service light for the routine maintenance of the engine oil change on the Volkswagen Tour…
Resetting the inspection and service light on the Volkswagen Touran
Resetting the inspection and service light on the Volkswagen Touran
Volkswagen Touran (2003-2015 / 1T, MK 1) Below, we will discover the instructions to reset the routine maintenance (service) light on the Volkswagen Touran. First, get into the vehicle and p…
Resetting the maintenance service light of the Volkswagen Touran
Resetting the maintenance service light of the Volkswagen Touran
Volkswagen Touran (2003-2015 / 1T, MK 1) Today's steps will allow us to reset the maintenance service light of the Volkswagen Touran. First, we get on board the car and start the instrument …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos