Do it yourself
Frequently asked questions about cars and motorcycles

How to Open the Door if the VW Passat Battery is Flat

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Key

See other generations:
Video tutorial

It may happen that even when pressing the remote key button to unlock the door lock, it does not activate, either because the remote battery is flat or the car battery is flat. In this case, you need to use the emergency key, which is the so-called blade or metal key stored inside the remote itself.

Once you have extracted the blade, remove the cover applied to the door handle to access the lock. Under the cap, there is a small slot where you can insert the blade to remove it, taking care to keep the handle open and not scratch the bodywork.

Once the cap is removed, you can insert the key into the lock and open it.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

Volkswagen Passat (2010-2014 / B7) In the unfortunate event that you need to open the bonnet of your Volkswagen Passat and the key battery is flat and not working, you can do so by rem…
Volkswagen Passat (2010-2014 / B7) How to replace the battery on a VW Passat? Follow the battery replacement process. Open the car door and pull up the engine compartment release lever…
Volkswagen Passat (2005-2010 / B6, 3C) In this short video guide, you will see how to open the door of your vehicle with a flat remote key battery, specifically on a third-generation Volks…

Other guides you may be interested in

    Frequently Asked Questions

    • Passat 2010-2014 - What to do if the Passat key does not open the car? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos