Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Lincoln Nautilus

Model: Lincoln Nautilus MK 1 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Headlight bulb

Video tutorial

If you want to replace a bulb on this vehicle model, you should read the necessary information and instructions in the description below and in the video. The first step is to open the hood and locate the headlight that contains the bulb to be replaced.

Remove the retaining clips from the plastic trim above the grille, then remove the support screws from the front bumper that you need to detach and remove. Next, locate the headlight mounting screws that are positioned above it. This way, you can pull the headlight assembly out and proceed with either a complete replacement or just the bulb replacement.


Updated on 17 July 2026 by ScegliAuto


Related tutorials

How to replace the cabin air filter of the 2023 Lincoln Nautilus
How to replace the cabin air filter of the 2023 Lincoln Nautilus
Lincoln Nautilus (2019-2026 / MK 1) To complete the replacement of the air filter inside the cabin of your 2023 Lincoln Nautilus, you must pay attention to all the steps described in th…
Replace Engine Oil and Oil Filter on Lincoln Nautilus 2.7L V6
Replace Engine Oil and Oil Filter on Lincoln Nautilus 2.7L V6
Lincoln Nautilus (2019-2026 / MK 1) In today's tutorial, you will see the necessary instructions to perform routine maintenance by replacing the engine oil and oil filter on the Lincoln…
How to Open the Hood of the Lincoln Nautilus?
How to Open the Hood of the Lincoln Nautilus?
Lincoln Nautilus (2019-2026 / MK 1) To open the hood of the Lincoln Nautilus, go inside the cabin on the driver's side: in the lower left area near the steering column, you will find a …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos