Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Filter on a Mercedes C-Class

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Engine oil

See other generations:
Video tutorial

How to replace the engine oil and filter on a Mercedes C-Class? Let's see in this guide how to proceed with the replacement: open the car door and pull up the hood release lever located at the bottom left of the dashboard and lift the hood, securing it. Using a socket wrench, remove the large retaining bolt of the container cap (where the oil filter is located).

Remove the air filter kit to access the filter and extract the worn oil filter.

Raise the car with a lift and remove the bolt from the oil pan (remove the protective panel); let the fluid drain into a container. Finally, top off with new fluid and close the hood.


Updated on 6 March 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a Mercedes C-Class
How to Change the Engine Oil in a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. To change the engine oil in a Mercedes C-Class, lift the vehicle to access the components under the hood. Locate the oil drain plug, which must.. …
How to Change Engine Oil and Filter on a Mercedes C-Class
How to Change Engine Oil and Filter on a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. oil and the corresponding filter on a Mercedes C-Class. Lift the car using a column lift or jack and remove the bolt located under the oil pan with a.. …
How to Perform Maintenance Service on the Mercedes C-Class 2.2L
How to Perform Maintenance Service on the Mercedes C-Class 2.2L
Mercedes Classe C (2007-2013 / W204) .. the engine oil and oil filter on the Mercedes C-Class 2.2L. First, lift the vehicle and start draining the engine oil by removing the drain plug located.. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos